BX7B-63N-16A-2P
BX7B-63N-16A-2P
- Magnetothermic Overvoltage Arrester
- Nominal current 16A
- 2 poles (single-phase installations)
- Type C curve
- For DIN rail
The BX7B series of circuit breakers is designed to protect low voltage electrical installations against overloads and short circuits. Conforms to the international IEC/EN 60898-1, standard, ensuring widely recognized safety and performance standards in residential, commercial and light industrial applications.
Among its advantages are versatility and compatibility: available in two current ratings and in 2 or 4 pole versions, making them useful in both single-phase and three-phase circuits. Simple installation on standard DIN rail with connections from above or below and good mechanical and thermal support for typical indoor environmental conditions.
The most common scenarios of use are electrical distribution panels in homes, offices, commercial premises and light industrial installations.
- Magnetothermic Overvoltage Arrester
- Nominal current 16A
- 2 poles (single-phase installations)
- Type C curve
- For residential, commercial and industrial installations
- DIN-rail installation
- IP20
- Complies with IEC/EN standard 60898-1
Specifications
| Range | Magnetothermic Overvoltage Arrester |
| Mounting | DIN Rail 35mm (EN 60175)) |
| Terminal type | Cable / Busbar (pin-type busbar) |
| Connection | Upper / lower |
| Upper connection section | 25mm2 AWG 18/3 |
| Lower connection section | 25mm2 AWG 18/3 |
| Torque | 2Nm |
| Recommended conductor cross-section | 2.5mm2 (Nominal current of 13-20A)) |
| Dimensions | 35.6 (W) x 81.4 (H) x 79.0 (D) mm |
ELECTRICAL CHARACTERISTICS | |
| Rated input current | 16A |
| Number of poles | 2P (Single phase) |
| Nominal voltage | 240V |
| Insulation voltage | 500V |
| Nominal frequency | 50/60Hz |
| Rated jump capacity | 6000A |
| Peak voltage | 6000V |
| Dielectric test voltage at industrial frequency (1 min) | 2kV |
| Type of curve | C |
| Pollution degree | 2 |
MECHANICAL CHARACTERISTICS | |
| Electrical life | 6000 operations |
| Mechanical life | 20000 cycles |
| Degree of protection | IP20 |
| Reference temperature | 30ºC |
| Operating temperature | -5 - 40ºC |
| Storing temperature | -25 - 70ºC |
In the box
- Magnetothermic Overvoltage Arrester